Other Accessories (e.g. Connectors & Circuit Boards)
Direct connector for MultiBar & Matrix
Suitable for MultiBar, Matrix and SuperFlux LED strips This connector facilitates the connection between two SuperFlux LED strips or LED matr...
View full detailsFischer Elektronik thermally conductive adhesive
The thermally conductive adhesive from Fischer Elektronik is suitable for the safe and thermal bonding of electronic components, such as B. High Po...
View full detailsThermally conductive adhesive tape, double-sided, blue, 50m
Double-sided adhesive tape with very good heat conduction Our double-sided, thermally conductive adhesive tape sticks reliably and has a low th...
View full detailsConnection cable for LumiFlex LED strips, 14.5cm
This adapter enables the quick and easy connection of LumiFlex LED strips from LUMITRONIX directly to our built-in power supplies. Without any tink...
View full detailsThermally conductive adhesive pad for star board
Double-sided thermally conductive adhesive pad, ideal for attaching our star board to a suitable heat sink. In addition to high adhesive strength...
View full detailsAluminum LUMITRONIX Star circuit board
Hex shape (without LED)
Cable, cross section 2x 0.75mm², 5m, PVC
Features of the supply line Wire cross section inner conductor: 2 x 0.75 mm² Cable: 2x24 / 0.20mm Outer Diameter: 2.5*5.2mm Cable Len...
View full detailsThermally conductive adhesive pad for SmartArrays
Double-sided thermally conductive adhesive pad, ideal for attaching our SmartArray to a suitable heat sink. In addition to high adhesive strengt...
View full detailsBender&Wirth connection element for Nichia COB-B family
The Bender & Wirth connection element – an efficient solution for the Nichia COB-B family Preserve the shine and longevity of your LEDs w...
View full detailsThermally conductive adhesive pad for 10x10mm circuit board
Double-sided thermally conductive adhesive pad, ideal for attaching our 10x10mm board to a suitable heat sink. In addition to high adhesive stre...
View full detailsConnector with cable for LumiFlex LED strips, 14cm
This connector facilitates the connection between two flexible LED strips from LUMITRONIX®. The connector is separated by a cable, allowing extend...
View full detailsLUMITRONIX 10x10mm aluminum board
Suitable for mounting 10mm Carclo lenses!
Direct connector for LumiFlex LED strips
This connector facilitates seamless connection between two LumiFlex LED strips from LUMITRONIX®. The connector is designed in such a way that when...
View full detailsLEDiL lens C15430_STRADELLA-16-HB-S
For street and industrial lighting The LEDiL C15430_STRADELLA-16-HB-S lens, which consists of 16 individual lenses, is ideal for LED array modu...
View full details4er-Set Abstandshalter für MultiBar & LED Matrix
LUMITRONIX Abstandshalter - Unverzichtbar für Ihre MultiBar & LED Matrix Installationen Die selbstklebenden Abstandshalter von LUMITRONIX sind ...
View full detailsWago 221-412 COMPACT connection terminal 2-pin
Easy wiring without tools With the COMPACT 221 Series Connector, WAGO has made it possible to connect all types of conductors without tools. Th...
View full detailsVARTA 4906 long life power batteries AA pack of 4
Longlife Power - Up to 80% more power than conventional VARTA alkaline batteries Devices with higher energy consumption also require batteries ...
View full detailsPower supply adapter for LumiFlex LED strips, 22cm
This adapter enables the quick and easy connection of LumiFlex LED strips from LUMITRONIX directly to our switching power supplies. Without any ti...
View full detailsFischer Elektronik thermally conductive adhesive mixer, WLK M 4
Mixer for Fischer Elektronik thermally conductive adhesive (2x2ml) WLK DK 4 (article 31986) and Fischer Elektronik thermally conductive adhesive (...
View full detailsHeat sink for LED modules up to 4W, black
Heat sink for LED modules up to 4W from LUMITRONIX – Perfect for your LED applications The LUMITRONIX heat sink, which is perfect for cooling L...
View full detailsJumper wire YV, 0.5mm, AWG24, 25m
The perfect accessory for many LED modules from LUMITRONIX® The YV jumper wire made of tinned copper is covered with red PVC and is supplied in...
View full detailsWago 221-413 COMPACT connection terminal 3-pin
Easy wiring without tools With the COMPACT 221 Series Connector, WAGO has made it possible to connect all types of conductors without tools. Th...
View full detailsHousing with internal reflector
With this product you can accommodate or fix your LED in a steel housing. This product is made of stainless steel areas of application including ca...
View full detailsLamp holder GU10 ceramic white
The innovative GU10 white ceramic lamp holder from LUMITRONIX Our LUMITRONIX® lamp holder type GU10 in bright white combines functionality and d...
View full detailsLuster terminal, 2.5 mm², 12-pin
12-pin terminal block with wire protection This luster terminal has 12 openings on each side. The built-in wire protection makes contacting eas...
View full detailsThermally conductive adhesive pad PowerBar V3, 285x27.5x0.19mm
Thermally conductive adhesive pad PowerBar V3 from LUMITRONIX The heat-conducting adhesive pad PowerBar V3 from LUMITRONIX is the perfect acces...
View full detailsFeed-in adapter for LED strips
This adapter (DC 2.5x2.5mm socket, 2-pin terminal block) enables a simple, uncomplicated connection of two loose cables to one of our universal pow...
View full detailsShrink tubing Ø 2.4mm
Shrink tubing to prevent short circuits With a little skill, these shrink tubings make soldering superfluous. When heated (e.g. with a lighter), th...
View full detailsLamp holder E27 black
Lamp holder for lighting during renovation work The black socket is ideal for lighting during renovation or construction work. The connection ca...
View full detailsSolder connector, waterproof
This solder connector made of polyolefin heat shrink tubing has a central solder ring with integrated flux and is also equipped with an internal a...
View full detailsLEDiL adapter for reflector 49.9mm and 70mm
LEDiL adapter for reflector 49.9mm and 70mm - your optimal solution for the MIRELLA and BARBARA reflectors The LEDiL adapter for reflector 49.9m...
View full detailsLamp holder E27 white
Lamp holder for lighting during renovation work The white socket is ideal for lighting during renovation or construction work. The connection c...
View full detailsResistance 0.33W
Optimally suited for our 3mm, 5mm, SMD and SuperFlux LEDs. Resistors are used in LED technology as series resistors to limit the current. Und...
View full detailsWago 224-101 light terminal 1-pin
Easy wiring without tools The Wago 224 series light clamp makes it possible to connect rigid, single-wire conductors with flexible, multi-wire ...
View full detailsThermally conductive adhesive pad for MaxLine 35 & 70, 16.5x280, Nitto TR5320F
Double-sided thermally conductive adhesive pad, ideal for attaching our MaxLine to a suitable heat sink. In addition to high adhesive strength, ...
View full detailsWago 224-112 light terminal 2-pin
Easy wiring without tools The Wago 224 series light clamp makes it possible to connect rigid, single-wire conductors with flexible, multi-wire ...
View full detailsMounting rings, for 5mm LEDs
The mounting rings are the ideal mounting aid for 5mm LEDs, which enable easy installation without gluing. Simply press the mounting ring into a ...
View full detailsCable, USB-C to USB-A, black, 1m
The 1m long USB cable is ideal for connecting/charging USB-C devices and standard USB devices or power adapters. This makes the cable perfect fo...
View full detailsChrome housing with external reflector, for 5mm LEDs
With this product you can accommodate or fix your LED in a noble housing. High quality thanks to chrome-plated stainless steel (stainless). are...
View full detailsVARTA 4903 long life power batteries AAA pack of 4
Devices with higher energy consumption also require batteries with higher capacity and performance. This is why VARTA's high-energy batteries are i...
View full detailsLay-up tool for BackMatrix
In combination with a bit holder (not included in delivery), you can use the insertion tool bit to easily press the cable into the insulation displ...
View full detailsResistance 1 watt, 120 ohms
Optimally suited for our 3mm, 5mm, SMD and SuperFlux LEDs. Resistors are used in LED technology as series resistors to limit the current. Unde...
View full detailsLuster terminal, 2.5 mm², 12-pin with mounting hole
12-pin terminal block with mounting hole This luster terminal has 12 openings on each side. The built-in wire protection makes contacting easie...
View full detailsResistance 5 watts, 33 ohms
Optimally suited for our HighPower LEDs. Resistors are used in LED technology as series resistors to limit the current. Under the Infocenter ...
View full detailsRing cable lug insulated, M4 red
The special funnel shape of the PVC collar of this ring cable lug has been specially developed to compensate for the "step" of the copper sleeve. ...
View full detailsDistribution plug for switching power supplies
This distributor enables the connection of three power lines to our switched-mode power supplies. The distributor is specified for a maximum of 2.5A.
LEDiL connection element C13708_PF-SOCKET-VERO10
LED holder for LEDs on star boards The LED connection element C13708_PF-SOCKET-VERO10 from LEDiL is compatible with LEDs on LUMITRONIX® star bo...
View full detailsResistor 0.33W, 470 Ohm - 5000 pieces
Resistor 0.33W, 470 Ohm from LUMITRONIX - Professional components for your LED solutions Discover the LUMITRONIX resistor 0.33W, 470 Ohm - optim...
View full details